Mon - Fri: 8:00am - 4:30pm
Closed Saturday & Sunday
0 items in the shopping cart

Panel Replacement - Removable Roller Cover Type Intermediate Panel Removal

  1. Close door and lock.
  2. Place two clamps in track above panel to be changed. These clamps will prevent the upper panels from dropping when panel is taken out. To do this, clamps are positioned below the roller.
  3. Remove roller covers of panel to be changed.
  4. Remove rollers.
  5. Drill out all rivets on panel.
  6. Lift up on door slightly and remove panel.
  7. Insert new panel.
  8. Drill new panel for fasteners.
  9. Lift up on door slightly, again, and tilt back new panel.
  10. Insert new fasteners.
  11. Reinstall new panel.
  12. Tighten fasteners, open door.