Service and Support



   
 
   
   

Rollup Door Quote/Order Submission
Leave this field empty
Request: Quotation    Order
Your Name:
Your Email:

 Account Information:
Bill To: Ship To:
Name: Name:
Bill To Address: Ship To Address:
City: City:
State: State:
Zip Code: Zip Code:
   


 Door Type:
PREMIUM
(Plywood Core)

STD. DRY-FREIGHT
ALUMINUM CLAD
STAINLESS STEEL CLAD
LAMINATED ALUMINUM
CARGOGUARD
GEN PURPOSE
(Plywood Core)

STD. DRY-FREIGHT
ALUMINUM CLAD
INSULATED
(Foamed in Place)

COLDSAVER
TEMPGUARD

SPECIALTY DOORS
BEVERAGE
NON-WOOD CORE
HINGED TRUSS II
1/2" PREMIUM PLATE
1/4" PREMIUM PLATE

Complete Door Includes:

• Assembled panel sections
   with four rows of hinges
• Galvanized steel track
• Counterbalance assembly
• E-Coated corrosion protected    hardware
• Top & bottom fixtures
• Lift handle & pull strap
• Lock assembly (77 or 4077 Standard)
• Top seal & bottom channel
• Track rollers
• SAE threaded hardware
  Options:

UNIVERSAL STYLE (Premium & General Purpose)
ADD SIDE SEALS (Standard on Coldsaver and Tempguard)
ADD BOTTOM SEAL
      (Premium Only, Seal Std on all Other Door Types)
PAINT FINISH   Specify
      (White Standard on Coldsaver, Tempguard, Alum Clad,
       Laminated Alum, Premium Plate)
INSIDE RELEASE
EXTRA ROW OF HINGES
STEEL ROLLERS (Steel Standard on General Purpose)
OMIT BALANCER
OMIT TRACK
METRIC THREAD ON HARDWARE

 Other Information:
Serial No. Spec #
Notes:
Order Info Per: Phone: Fax:

 Trailer or Truck Body Dimensions:

To ensure that doors fit properly, use figure (1 or 2) that represents your installation:

 

OR

 
"H" - Header Depth - Distance from the underside (bottom of header) up to the roof skin or liner.

RECOMMENDED MINIMUM HEADER DIMENSIONS:
Dry-Frt178mm(7 in)
Coldsaver203mm (8 in)
Tempguard203mm (8 in)
Hinged Truss II    191mm (7-1/2 in)
*If an installation requires the header to be shorter than the above minimums, insert new header dimension and notify us. Special track set-ups may accommodate your shorter header dimension.

"X" - Sill or Floor to Header - Distance from where the door sits on the sill or floor to the bottom of the header. It might also be called "Opening Height"

"Y" - Sill or Floor to Ceiling - Distance from the sill or floor to the bottom of the lowest obstruction - either a roof bow or the finished ceiling itself.


The frame must be square. The wall to wall dimension should not vary. If walls do vary, use the narrowest point it may be necessary to shim the tracks to fit.
 
 

  "P" - Minimum Post Dimension
64 mm (2-1/2 in)

"R" - Post to Post - Distance between the posts at the narrowest point. Also called "Opening Width". The posts cannot be bowed or tapered.

"S" - Wall to Wall or Outside Track to Track - The point where the back side of the track will be positioned. This measurement must be the finished distance from wall to wall.

"B" - Roof Bow Thickness - Thickness of roof support or ceiling liner.

Click Here to Print This Page

To ensure the printing of the door and frame images, please be sure to turn on "Print background colors and images."
In Internet Explorer -> Tools -> Print -> Page Setup -> Check "Prink background colors and images"
In Firefox -> File -> Print -> Page Setup -> Options -> Check "Print Background (colors and images)"
In Chrome -> Click the controls icon -> Print -> More Setting -> Check "Background Graphic"

   required fields